[Equest-users] How to set DIAGNOSTIC to COMMENT in eQuest

[Paul Riemer]

I wonder if you could add it into the  'BDLExt32.ini'  file and have eQUEST wizard spit it out as it creates an inp.

Emphasis on the wonder because I have not tried editing that file yet but it sure looks tempting to add a write line there.


________________________________
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Aulbach, John
Sent: Friday, September 05, 2008 2:49 PM
To: Doug Maddox; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] How to set DIAGNOSTIC to COMMENT in eQuest

In the front of the .inp file is a space for diagnostics. You may put into the .inp file at this point anything like this:

DIAGNOSTIC COMMENTS ERRORS ..

Look at Page 12 of the DOE-2.2 Volume 2 (Dictionary) for examples.



________________________________
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Doug Maddox
Sent: Friday, September 05, 2008 8:45 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] How to set DIAGNOSTIC to COMMENT in eQuest

Could anyone tell me how to set DIAGNOSTIC to COMMENT in eQuest?


Doug Maddox

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080905/687b3161/attachment-0001.htm>