[Equest-users] Code compliance in v3.64
Paul Diglio
paul.diglio at sbcglobal.net
Mon Sep 27 09:35:55 PDT 2010
Alex:
I am having the same problem. I have a small project that I modeled in 3.63
that has no errors or warning, but when I try 90.1 compliance I too get all
kinds of unusual errors.
Could it be that the project needs to be modeled in 3.64 from the get-go?
Paul Diglio
________________________________
From: Alex Densmore <adensmore at integralgroup.com>
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Sent: Mon, September 27, 2010 11:31:10 AM
Subject: [Equest-users] Code compliance in v3.64
Hi users,
I’m curious if anyone has been using the new compliance module for v3.64 in the
detailed mode. I’ve been encountering a large number of “rules evaluation”
errors, and every time I fix one there seems to be 5 more that pop up in its
place. These are more difficult to de-bug than normal errors because the message
doesn’t clearly lead you to where the error is, and it’s not a DOE-2 error that
I can fix in the inp file.
Has anyone successfully done a Title 24 or 90.1 compliance run in detailed mode?
Any tips – or do I just have to slog through these errors (which probably means
I’ll just switch to EnergyPro)?
Alex Densmore, PE, LEED AP
Project Engineer
Please Note New Name and Address
________________________________
I N T E G R A L
GROUP
427 13th Street, Oakland CA 94612
510 663 2070 x 237
adensmore at integralgroup.com
www.integralgroup.com
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100927/b88c3805/attachment-0002.htm>
More information about the Equest-users
mailing list