[Equest-users] campus modeling

[kirti pabrekar]

Thank you everyone for your valuable inputs.


Kirti

On Tue, Nov 15, 2011 at 2:15 AM, John Aulbach <jra_sac at yahoo.com> wrote:

>  Thanks for a clarifying view, Steve. I come from the world of running
> DOE-2.1B in a desktop for 12 HOURS !! So a few minutes more run time isn't
> even on my radar !!
>
>   *From:* STEVE SAMENSKI <steve at thespinnakergroupinc.com>
> *To:* John Aulbach <jra_sac at yahoo.com>; kirti pabrekar <
> arkirtipabrekar at gmail.com>; "equest-users-request at lists.onebuilding.org" <
> equest-users-request at lists.onebuilding.org>; "
> equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
> *Sent:* Monday, November 14, 2011 5:23 AM
> *Subject:* Re: [Equest-users] campus modeling
>
>   Kirti --
>
> The method you propose is slightly different than what John recommends.
> Clicking the multiplier box (your proposal) is really more appropriate for
> repetitive floors of a tower. What John's recommending is that you create
> one building and then copy it in the shell Wizard. John's method gives
> greater accuracy but will require more computation time for your computer.
> This is probably a good trade-off.
>
>  Steve Samenski, PE, LEED AP BD+C, BEMP
> Vice President - Sustainable Technologies
> The Spinnaker Group
> 786-385-3510
> www.thespinnakergroupinc.com*
> *
>
>  From: John Aulbach <jra_sac at yahoo.com>
> Reply-To: John Aulbach <jra_sac at yahoo.com>
> Date: Mon, 14 Nov 2011 05:49:45 -0800 (PST)
> To: kirti pabrekar <arkirtipabrekar at gmail.com>, "
> equest-users-request at lists.onebuilding.org" <
> equest-users-request at lists.onebuilding.org>, "
> equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
> Subject: Re: [Equest-users] campus modeling
>
>   Kirti:
>
> I have done campuses several times. Each building that is duplicated can
> use the multiplier method, but each building may have a different
> orientation and distance between the others. Create Building 1 shell
> (single story ??), then create the 2nd building (duplicating the 1st
> building), but then on the 1st screen give it a distance and orientation
> from the 1st building. If all other parameters are the same in Building 1
> as Building 2, you should be fine.
>
> John Aulbach
> Partner Energy
>
>   *From:* kirti pabrekar <arkirtipabrekar at gmail.com>
> *To:* equest-users-request at lists.onebuilding.org;
> equest-users at lists.onebuilding.org
> *Sent:* Sunday, November 13, 2011 9:28 PM
> *Subject:* [Equest-users] campus modeling
>
> hi,
>
> i have to model a two campus buildings.
> in one case the buildings are such designed that they are independent
> structures located a distance away from each other. there are four building
> with stilt parking under each.
>
> and in the second case, the buildings are designed as a closed loop with a
> small construction joint in them. also in this case there are 12 buildings
> in all, but 5 prototypes which are repeated to form a closed loop. will
> checking the shell multiplier tab help in this? i was thinking of using the
> shell multiplier for buildings with repetitive footprints instead of making
> all the 12 buildings.
>
> please guide me through.
> thanking all in anticipation.
>
> --
> Regards,
> Ar. Kirti Pramod Pabrekar.
> IGBC AP, LEED India,
> M. Arch,
> Environmental Planning and Design.
>
> *...Green is a commitment...not a competition...*
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
> _______________________________________________Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org To
> unsubscribe from this mailing list send a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>


-- 
Regards,
Ar. Kirti Pramod Pabrekar.
IGBC AP, LEED India,
M. Arch,
Environmental Planning and Design.

*...Green is a commitment...not a competition...*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111117/3a9245c7/attachment-0002.htm>