[Equest-users] window switching crashing eQuest v3.64
Deepika
deepika.khowal at gmail.com
Tue Oct 9 08:52:20 PDT 2012
James
Which window pair are you using from the library ?
You have to make sure you use the right pair else it will crash .
Also confirm that you selected the clear as your window type and then chose the tinted as switch type
On Oct 9, 2012, at 7:25 AM, "James Hansen" <JHANSEN at ghtltd.com> wrote:
> Has anyone successfully applied window switching in eQuest? I'm trying, and it crashes, regardless of whether I try and enter the parameters in eQuest or in the DOE-2 input file. Just trying a simple TOT-SOL-INC variable, but none of the switching methods seem to work. I can define the switched window manually, but as soon as I try and select a switch type, it crashes.
>
> Anyone else experience this? Thanks!
>
> (I searched for this, found a few references to eQuest crashing, but no fixes)
>
> GHT Limited
> James Hansen, P.E., LEED AP
> Senior Associate
> 1010 N. Glebe Road, Suite 200
> Arlington, VA 22201-4749
> 703-243-1200 (office)
> 703-338-5754 (cell)
> 703-276-1376 (fax)
> www.ghtltd.com
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121009/27431fb8/attachment-0002.htm>
More information about the Equest-users
mailing list