[Equest-users] Error running LEED Baseline Simulation

[Chris Jones]

If the simulation runs fine  and the Compliance runs that generate 
the error, then it is likely a Compliance engine error.


At 05:38 PM 21/01/2013, Ed McAvoy wrote:
>Hi everyone,
>
>While attempt to run a Equest baseline report for LEED the following 
>error stops the program.
>
>Error - DeletComp () causing deletion of component whose assignment 
>to another component is required     evaluating rule: Delete circ 
>loops except DHW
>
>Here is a screen shot:
>
>
>
>[]
>
>There is no option to navigate to the error.
>
>Has anyone had this problem and been able to correct it?
>
>Thanks in advance.
>
>Edward McAvoy, P.E., LEED AP
>Project Director
><mailto:emcavoy at ceicinc.com>emcavoy at ceicinc.com
>CE&IC
>2 Terri Lane
>Suite 125
>Burlington, NJ 08016
>Phone: 609-387-1700 / Fax: 609-387-9322
>
>
>
>
>_______________________________________________
>Equest-users mailing list
>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>To unsubscribe from this mailing list send  a blank message to 
>EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 >>
Christopher Jones, P.Eng.
Suite 1801, 1 Yonge Street
Toronto, ON M5E1W7
Tel. 416-203-7465
Fax. 416-946-1005
email cj at enersave.ca
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130123/f89cdc14/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 17c1230.png
Type: image/png
Size: 42124 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130123/f89cdc14/attachment-0002.png>