[Equest-users] Problem with Exhaust fan simulation
Byron Burns
B.Burns at ha-inc.com
Thu Mar 7 03:41:29 PST 2013
Have you tried distributing the exhaust to zones close to the kitchen,
which may provide make up air to the negatively pressurized space?
Either that or create a smaller subzone that you can change the balance
of exhaust air source to infiltration rather than from air handler.
Byron D. Burns
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Morteza
Kasmai
Sent: Monday, March 04, 2013 9:49 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Problem with Exhaust fan simulation
Hello all,
The project that I'm working at has Exhaust fans for service areas and
kitchens. I entered EFs data within the Wizard Screen 14 (Zone Group
Definitions, Zone Group Details). For the baseline model which s in
Auto-sixe Flow condition for Supply Fans there is no problem and eQUEST
simulate the project. But for Design model that I entered the Fan Flow
and OSA from drawings, the simulation terminates due to the following
error:
Although I increased the assigned the same air flow or larger volume
than the exhaust flow (in DDE mode), the error remains the same.
Your help would be greatly appreciated.
Morteza
--
Morteza Kasmaei
Architect, LEED(r) AP BD+C
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130307/f783fdc2/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 73508 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130307/f783fdc2/attachment-0002.png>
More information about the Equest-users
mailing list