[Equest-users] entering a balance point into eQuest
solrosenbaum at gmail.com
Wed May 21 15:17:49 PDT 2014
I am under the impression that it does, but I will confirm with the building
IS there a way to enter it into eQuest in either case?
From: Sami, Vikram [mailto:vikram.sami at zgf.com]
Sent: Thursday, May 22, 2014 1:10 AM
To: Sol Rosenbaum; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] entering a balance point into eQuest
Does that factor in supplying minimum ventilation air at 47 degrees?
BEMP, LEED BD+C
ZGF ARCHITECTS LLP
T 206.521.3509 E vikram.sami at zgf.com
925 Fourth Avenue, Suite 2400
Seattle, WA 98104
From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On
Behalf Of Sol Rosenbaum
Sent: Wednesday, May 21, 2014 2:50 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] entering a balance point into eQuest
>From discussion with the site contacts and some of the data we pulled from
the management's EMS system, we know that the building's balance point is 47
degF outdoor air temperature. Above that temperature, no heat is required
in the building.
Is there a place to enter this into eQuest so that it will be able to know
when the heating hours required based on the temperature data?
The contents of this email and any attachments to it contain confidential
and/or legally privileged information from Zimmer Gunsul Frasca Architects
LLP or its affiliates. If you are not the intended recipient, or an employee
or agent responsible for delivering this message to the intended recipient,
be aware that any disclosure, copying, distribution, or use of the
information contained herein is strictly prohibited. If you received this
transmission in error, please contact the sender and destroy the material in
its entirety, whether in electronic or hard copy format.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Equest-users