Re: [EnergyPlus_Support] Geometry

[Linda Lawrie <linda@xxxxxxxxxx>]

At 04:50 AM 3/31/02, you wrote:
> If you
> modeled the floor and  the roof of zone 8 of the example file
> solarshadingtest.idf with two rectangles the message you get during
> simulation is "too many variables requested, will go with first
> 254" and the results you get in the spreadsheet are
> different.

This message actually comes out of the post-processor because Microsoft
Excel limits their number of variables to 254.  The eplusout.eso
file will have all the variables that you have requested in it and you
would need to run the post processor multiple times (with different
inputs) to get all the variables.

I'm not sure what results you are referring to being different.
 
> Does
> Energyplus accept negative coordinates for geometry?
>  

It should.

Linda

Yahoo! Groups Sponsor

ADVERTISEMENT

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/






Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.