[EnergyPlus_Support] Eplus output

[skalogir@xxxxxxxxxxxxxxxx]

I managed to model my first building with E+. This is a typical house I modelled before
with TRNSYS. I want to check the accuracy of the results and I wonder if E+ can output the
heat gains from the various walls, roof and floor so as to compare the results. As I
understand this info can be obtained only for the windows. Is this correct. By having the
loads from the various parts of a zone then a designer can investigate the effect that
various measures can have on the loads as for example the use of
insulation.
 


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get 128 Bit SSL Encryption!
http://us.click.yahoo.com/CBxunD/vN2EAA/xGHJAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/