Re: [EnergyPlus_Support] Eplus output

["Michael J. Witte" <mjwitte@xxxxxxxx>]

The report variable "Opaque Surface Inside Face Conduction" should 
give you what you want.

Mike


On 3 Dec 2002, at 6:20, skalogir@xxxxxxxxxxxxxxxx wrote:

> I managed to model my first building with E+. This is a typical house
> I modelled before with TRNSYS. I want to check the accuracy of the
> results and I wonder if E+ can output the heat gains from the various
> walls, roof and floor so as to compare the results. As I understand
> this info can be obtained only for the windows. Is this correct. By
> having the loads from the various parts of a zone then a designer can
> investigate the effect that various measures can have on the loads as
> for example the use of insulation.
> 


========================================================
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx