[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Eplus output

The report variable "Opaque Surface Inside Face Conduction" should 
give you what you want.

Mike


On 3 Dec 2002, at 6:20, skalogir@xxxxxxxxxxxxxxxx wrote:

> I managed to model my first building with E+. This is a typical house
> I modelled before with TRNSYS. I want to check the accuracy of the
> results and I wonder if E+ can output the heat gains from the various
> walls, roof and floor so as to compare the results. As I understand
> this info can be obtained only for the windows. Is this correct. By
> having the loads from the various parts of a zone then a designer can
> investigate the effect that various measures can have on the loads as
> for example the use of insulation.
> 


========================================================
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get 128 Bit SSL Encryption!
http://us.click.yahoo.com/CBxunD/vN2EAA/xGHJAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/