[EnergyPlus_Support] Zone return air path

[HSIEH Chun-Ming <chunming@xxxxxxxxxxxxxxxxxxx>]

Hello,

I am chunming. I have a question about zone return air path.
In each of the "ZONE RETURN AIR PATH",  there is a limitation that at 
most 10 component can be input.
But now, I am simulating a building with 15F, each story with a plenum 
on it. That means 15 plenums here.
Do I need to create the other new zone return air path or even a air 
primary loop in this case?
Is there any example with mutiple air paths or air primary loop in E+?
Thank you very much.

Chunming




------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get 128 Bit SSL Encryption!
http://us.click.yahoo.com/xaxhjB/hdqFAA/VygGAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/