[EnergyPlus_Support] ground loop heat exchanger

["zhaicq98" <chaoqinz@xxxxxxxxxxxxxx>]

I posted this message just now, but it seems it did not appear in the 
newsgroup. Here I am sending it again...

I read from the manual that the ground loop heat exchanger is part of 
condenser loop in E+. Does it mean the ground loop heat exchanger can 
not be used directly, but have to be used together with heat pump or 
chiller?

What I am trying to simulate is a system where the cool water from 
ground heat exchanger is used directly in the fan coil unit or 
radiate panel for space cooling in summer. While in winter, the 
ground heat exchanger is used together with a heat pump. The hot 
water from the heat pump is piped into the fan coil unit or radiate 
panel for space heating.

Can it be done in E+? Thanks





------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get A Free Psychic Reading!
Your Online Answer To Life's Important Questions.
http://us.click.yahoo.com/cjB9SD/od7FAA/uetFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/