[EnergyPlus_Support] load and energy balance

[Helen Xing <hxing@xxxxxxx>]

Hello, there.  I was just wondering what is the best/easiest way to

1) get a building's hourly total cooling loads from E+
2) verify that the cooling plant is providing enough (or not enough) energy 
to meet the building load on an hourly basis

I pulled out some outputs from E+ and tried to do a balance check.  But it 
didn't seem to match.  While checking the model, I wonder if I used the 
right outputs from E+.  Thanks a lot in advance for your help.

Regards,
Helen Xing


------------------------ Yahoo! Groups Sponsor ---------------------~-->
Upgrade to 128-Bit SSL Security!
http://us.click.yahoo.com/p7cEmB/s7qGAA/yigFAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/