[EnergyPlus_Support] Basic Residential AC Modeling Information

["Ian Doebber" <idoebber@xxxxxx>]

I am trying to model a standard packaged Air Conditioner for my residence.  I am interested in the typical air conditions right after it exits the cooling coil.  I am mainly interested in how reduced the temperature should be below my set point temperature (I have seen roughly 15-25 F below), my air flow rate per ton of cooling (I have seen roughly 350-450 cfm/ton), and what the humidity ratio should be (right now I have set it at 0.0094).  Also, what is a typical Sensible Heating Ratio for a residential air conditioner (right now I'm geting ~75%) and if anyone could give me their estimation for the ton of cooling for a 2275 ft2 house in Atlanta would be that would be great.  Finally, other then ASHRAE Fundamentals, are there any other standard ratings for the exiting air conditions and where could I find them.

Thanks
Ian Doebber
Masters Student
Virginia Tech

[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com.  Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/