[EnergyPlus_Support] Two questions on surface heat transfer

["pizzaalan" <pizzaalan@xxxxxxxxx>]

I had two questons on surface heat transfer. 

First, I have a zone plan like below,

---------------------
|                   |
|                   |
| Zone 1            |
|                   |
|     Wall 11       |
---------------------
| wall21 | Wall31   |
|        |          |
| Zone 2 | Zone 3   |
|        |          |
---------------------
(0,0,0)  (10,0,0)   (20,0,0)
     South 

The problem is when I tried to specify the "outside  face 
environment object" of wall 11 at zone1, it should be both wall 21 
of zone2 and wall 31 of zone3. How can I input both of them?

Secondly, if I use relative coordinate system, all of zone origins 
should be (0,0,0), and then the south exterior wall of zone 3 should 
be described as (10,0,0), (20,0,0), (20,0,3) and (20,0,3). Is it 
right? 

Thank you in advance and have a nice day!

Alan
Sincerely,






------------------------ Yahoo! Groups Sponsor ---------------------~-->
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/dkFolB/TM
---------------------------------------------------------------------~->

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
     EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/