Re: [EnergyPlus_Support] Setting temperatures on EnergyPlus

["Ian Doebber" <idoebber@xxxxxx>]

Sope

Look at using the "OtherSideCoefficients" in the InputOutputReference.  This
set up allows you to specify temperatures and other boundary conditions for
you wall systems.  Look at the "GroundTempOSCCompactSched" example idf file
to see how to implement this method  Hope this helps

Ian

----- Original Message ----- 
From: <sope_obadeyi@xxxxxxx>
To: <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Monday, July 19, 2004 4:19 AM
Subject: [EnergyPlus_Support] Setting temperatures on EnergyPlus


> Hi,
>
> I have just started using EnergyPlus and am still feeling my way around
the
> program.
>
> I would like to construct a simple conductive and convective heat transfer
> model for a single wall (with no ground or moisture effects). I would like
> to set the air temperatures on both sides of the wall myself. Can you
> please advise me whether it is possible to use EnergyPlus in this type of
> arrangement and how I would set the temperatures on the input file?
> The Engineering Documentation states the Conduction Transfer Module can be
> used to find an inner surface temperature and an outer surface temperature
> can be calculated using the  weather file along with various other
> parameters (Is my understanding of this correct ?). But the documentation
> does not give much information on setting inner and outer temperatures,
> though I imagine it is possible to do this.
>
> Also if you can set the inner and outer air temperatures can one set the
> inner and outer wall surface temperatures?
>
> Many Thanks
>
> Sope Obadeyi
>
>
>
>
> __
> IMPORTANT NOTICE:
> This email may be confidential, may be legally privileged, and is for the
intended recipient only.
> Unauthorised access, disclosure, copying, distribution, or reliance on any
of it by anyone else is prohibited and may be a criminal offence.
> Please delete if obtained in error and email confirmation to the sender.
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the appropriate
folder in the Files area of the Support Web Site.
>
> Yahoo! Groups Links
>
>
>
>
>



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Make a clean sweep of pop-up ads. Yahoo! Companion Toolbar.
Now with Pop-Up Blocker. Get it for free!
http://us.click.yahoo.com/L5YrjA/eSIIAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/