[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: about the design day

  The results won't vary whether you set the winter design day as Jan 
20 or Jan 21.The results just connect to the design day that you 
define.Note that you set the Day Type to 
SummerDesignDay/WinterDesighDay,it indicate that you must designate 
the SummerDesighDay and WindterDesighDay schedules.
Please check that the two schedules have been designated properly. 

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "beyangj" <beyangj@h...> 
> Dear, 
> In my IDF file, I defined two DesignDays, namely summer design day 
> and winter design day.  The summer design day object had field Day 
> Type set to SummerDesignDay, and the winter design day object had 
> field Day Type set to SummerDesignDay. The winter design day was 
> 21 1989 first, but the system didn¡¯t work on this design day 
> simulation, there was no heating and no cooling on that day. Then I 
> set the winter design day as Jan 20 1989,   but that didn¡¯t work 
> yet. I wondered why that happened, and that would affect the 
> of  heating energy?
> best,
> Stewart

------------------------ Yahoo! Groups Sponsor --------------------~--> 
$9.95 domain names from Yahoo!. Register anything.

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: