[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] can't meet demand?

  I've run a simulation.I set the thermostic setpoint temp at 21.1
(heating) and 23.9(cooling).Since i use the single 
duct:vav:noreheat,i set the supply air temp setpoint at 26(winter) 
and 12(summer).i found the zone temp is bigger a lot than thermostic 
setpoint while heating(21.1);but the zone temp can't reduce in summer.

So i vary the supply air temp setpoint at 4 in summer.Then the zone 
temp can reduce but is much bigger than thermostic setpoint temp
(23.9).i'am puzzled.How can i adjust it to meet the demand?Can l 
adjust by varying supply air temp?If not,what should i vary?

I've upload my idf.zip.Appreciated your help.


------------------------ Yahoo! Groups Sponsor --------------------~--> 
$4.98 domain names from Yahoo!. Register anything.

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: