[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Input problem in chiller:electric




Hi,
 
1. For the Chiller:electric Object at the page no. 383 of InputOutputReference Doc., the capacity ratio curve.
 
How to determine the value of "Ratio of Available Capacity to Nominal Capacity"?
Is the value of nominal capacity getting from e.g. Carrier's catalogue, then how about the value of available capacity and its stand for?
 
How to determine the value of "Temperature entering the condenser" and  "Temperature leaving the evaporator"? Is these values comming from catalogue and what is the difference between these values with "TempCondInDesign" and "TempEvapOutDesign".
 
Thanks,
 
SAMLEE
 
 

借過、一拍兩散、奇洛李維斯回信...
全港最大手機下載中心
http://mobile.yahoo.com.hk/


[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/