[EnergyPlus_Support] About the heating load

["beyangj" <beyangj@xxxxxxxxxxx>]

Dear,
There was a warning in the ERR file as follow:
** Warning ** The design coil load is zero for 
COIL:Water:SimpleHeating MAIN HEATING COIL 1
   **   ~~~   ** The autosize value for max water flow rate is zero
   **   ~~~   ** To change this, input a value for UA, change the 
heating design day, or lower
   **   ~~~   **   the system heating design supply air temperature

I don't know why this happened. I changed the heating design day, 
but it didn't work,and it gave the same warning message. And the 
Heating:Electricity [J](RunPeriod) in the Meter file wasn't zero, it 
was 3.90248E+12J, and the heating load is correct in this case? 
Thanks in advance!

Best,

Stewart







The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/