[EnergyPlus_Support] overhang - Surface:Shading:Attached

["Arno Dentel" <arno.dentel@xxxxxxxxxxxxxxx>]

Hello.
I compared two identical rooms, but one of them has an overhang.
As report variabel I chose "Zone Transmitted Solar" but the amount of 
solar radiation entering the zone is the same.
Has anybody a hint for me?
 
Arno.
 
 
 
Surface:Shading:Attached,
    overhang,                !- User Supplied Surface Name
    Sued,                    !- Base Surface Name
    ,                        !- TransSchedShadowSurf
    4,                       !- Number of Surface Vertex Groups --
Number of (X,Y,Z) groups in this surface
    -10,                     !- Vertex 1 X-coordinate {m}
    -10,                     !- Vertex 1 Y-coordinate {m}
    3,                       !- Vertex 1 Z-coordinate {m}
     10,                     !- Vertex 2 X-coordinate {m}
    -10,                     !- Vertex 2 Y-coordinate {m}
    3,                       !- Vertex 2 Z-coordinate {m}
     10,                     !- Vertex 3 X-coordinate {m}
    0,                       !- Vertex 3 Y-coordinate {m}
    3,                       !- Vertex 3 Z-coordinate {m}
    -10,                     !- Vertex 4 X-coordinate {m}
    0,                       !- Vertex 4 Y-coordinate {m}
    3;                       !- Vertex 4 Z-coordinate {m}
 
 


[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/