[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: AW: [EnergyPlus_Support] overhang - Surface:Shading:Attached

At 05:08 AM 6/3/2005, Arno Dentel wrote:
>my inputs are correct. Only the field ?sun exposure? of the base surface
>was set to ?no sun?.
>What does EneryPlus calculate by setting the sun exposure to ?no sun?.
>Only diffuse radiation or no radiation?

"no sun" means no effects of the sun, no diffuse, no direct, no ground 
reflected, radiation will be incident on the surface.

One would usually use "no sun" for interior surfaces only.


EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team

[Non-text portions of this message have been removed]

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: