Re: [EnergyPlus_Support] Part Load Factor Curve for Water Tanks and Boilers

["Michael J. Witte" <mjwitte@xxxxxxxx>]

Part-load data is very difficult to find.  If you have not received any 
response to this, you may wish to post the same question at BLDG-SIM@xxxxxxxx 
which is a general list for building simulation questions.  If you are not a 
member of BLDG-SIM, see http://www.gard.com/ml/bldg-sim.htm for instructions.

Mike


On 28 Jun 2005, at 12:47, Miguel Angel Pascual Buisan wrote:

> Hello,
> 
> 
> 
> Does anybody know where can I find reference values for Part Load Factor
> Curves for Water Tanks Heaters and Boilers (operating under modulating or
> cycling control).
> 
> 
> 
> Thanks in advance,
> 
> 
> 
> Miguel Angel
> 
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 



========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/