[EnergyPlus_Support] Connected Zones

["dan_grunbaum" <dan_grunbaum@xxxxxxxxx>]

Hi there,

I am attempting to model zones which do not have partitions seperating 
them however they are kept at different conditions. To do this I have 
modelled them with partitions, however i have attached windows to the 
partitions which are nearly completely transparent to solar, visible 
and long wave length radiation and with a high conductivity. Is this 
the best way to model this situation or should I be doing something 
else ?

Regards,

Dan






------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/