[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] primary-secondary plant loop system with different setpoint temperatures



Can I use the CONNECTION COMPONENT:PLANTLOOP to build up a primary-
secondary plant loop system with different setpoint temperatures?

I've tried to adapt the TermReheatPri-SecLoop example:
Just added a new setpoint schedule with const. 12°C and used this 
schedule in the secondary loop setpoint manager.
But this did not work as expected. I.e. it does not change the 
temperature in the secondary loop.
Have I forgotten something?


And by the way, even the original TermReheatPri-SecLoop example gives 
a lot of warnings (E+ v1.2.3). 
 ** Warning ** Error -- Mass Flow Rate Calculation in Plant 
Loop=CHILLED WATER PRIMARY LOOP, Outlet and Inlet differ by more than 
tolerance.
Should I ignore this warnings?

Christian





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/