[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Control Node Setup



Hi All,

I have a fixed flow system feeding two zones, on the air loop there's 
a cooling coil and a supply fan followed by a steam humidifier, I then 
have two separate reheat coils serving the two zones. In these zones I 
want to control both the temperature and the humidity.

I have a CONTROLLER:SIMPLE for each of the coils (1 cooling, 2 
reheats) and SET POINT MANAGER:SINGLE ZONE REHEAT for the reheats and 
SET POINT MANAGER:SINGLE ZONE COOLING for the cooling coil.

I'm able to get control of the RH or the temperature in the zones but 
not both at the same time.

Could my control nodes be the source of the problem?

Regards,
John. 





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/