[EnergyPlus_Support] Heat exchanger

["tonybaxterhevacomp" <tony@xxxxxxxxxxxx>]

Hello anyone,

I am using a HEAT EXCHANGER:AIR TO AIR:GENERIC, my question relates to 
the 'Nominal Supply Air Flow rate'.  The manual states that actual flow 
rates should be within 50% to 130% of this or a warning will be given.  
I have tried various values (eg 0.9, 9) with an air lfow rate of 0.3, 
but get no warning, which I assume would be on the .err file.  Does 
this field matter - I assume that part load effectiveness uses this 
field, but I am using a constant efficiency independent of low rate.

Many thanks

Tony Baxter







------------------------ Yahoo! Groups Sponsor --------------------~--> 
Everything you need is one click away.  Make Yahoo! your home page now.
http://us.click.yahoo.com/AHchtC/4FxNAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/