[EnergyPlus_Support] Re: zone temperature error

["hbn_pch" <hbn_pch@xxxxxxxxxxxx>]

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "energypluser" 
<energypluser@...> wrote:
>
> Dear all:
> As refer to the InputOutputReference, the zone control: 
thermostatic is in charge of 
> controlling the zone temperature. I set a dual setpoint with 
deadband object for my zone, 
> and my chiller have abundant capacity to serve the zone. But in the 
summer design day, the 
> temperature is out of the deadband. I have checked the schedules 
for the HVAC system and 
> the simulation results of the system. It seems that the system is 
operating in the design day. 
> How can I make the system supply enough cooling energy to keep the 
zone temeprature in 
> the deadband?
> Thank you in advance!
> 
> mac.cz

Do you set all autosized?Energyplus just autosize the sensible 
load,so if the latent load is big,then the chiller would autosize not 
enough.Perhaps you can set the sizing parameters or zone sizing 
factor to supply enough colling.

Good luck.

 pch
>







The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/