[EnergyPlus_Support] Defining zones

[David Barrera <davidabraham_b@xxxxxxxxx>]

Hi:
The building I?m simulating has something like meeting
points (a 20x11 m area) in 1st and 3rd levels; the
point is that the floor of this area units south and
north floors of the building; on the other hand,
there?s no meeting area in the rest of the levels
(2nd, 4th, 5th and 6th), due to this, air travels free
between this space from one level to the other. Should
I be careful about something considering that each
level has the minimum of 6 surfaces that a zone need
to be defined (just like I?ve done, one zone for each
level), but there are spaces that intercommunicate the
air among zones? Thanks a lot. 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/