[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Using and/or post processing the output variables from EnergyPlus
Dear Natasa,
I'm currently experiencing the same challenge namely telling/forcing
GenOpt to select a reported variable of interest addressed during a
certain timestep from the entire simulation period (e.g. 24-hours).
I'm aware that I somehow need to pre-process the eso-file and isolate
the reported variable of interest and subsequently have GenOpt
process the reassembled output (e.g. eplusout.eso ->
electricity:facility_hourly.csv).
Thus I was wondering if you were able to solve the issue?
I appreciate your feedback,
Sandro
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Padhmanabhan, Sankar"
<sankar.padhmanabhan@...> wrote:
>
>
>
> Hi Brent,
> Can GenOpt look into htmal files. I was thinking that only text
based files can be handled by GenOpt. If it can handle the tables
created by energyplus what will be the delimiter?
>
> Thanks
> Sankar
>
> -----Original Message-----
> From: EnergyPlus_Support@xxxxxxxxxxxxxxx on behalf of Griffith,
Brent
> Sent: Mon 6/13/2005 1:31 PM
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Subject: RE: [EnergyPlus_Support] Using and/or post processing the
output variables from EnergyPlus
>
> You should also consider getting results from EnergyPlus's tabular
reports. I use the html version of the ABUPS report for summary
data, because there are html tags in it are useful for identifying
results. I would try to use a TimeBins report to get an average
indoor temperature at 1200. As you get more and more into using
optimization, you are probably going to need to create a little
postprocessing program to read E+ results and then output the value
for your objective function.
>
>
>
>
>
> -----Original Message-----
> From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]On Behalf Of natasamdj
> Sent: Monday, June 13, 2005 5:47 AM
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Subject: [EnergyPlus_Support] Using and/or post processing the
output variables from EnergyPlus
>
>
> Dear,
> I have used GenOpt for the optimization of EnergyPlus. I know that
> in GenOpt you can optimize just the last written variables in the
> *.eso file. This means that if I want to have regular results I
have
> to use the daily report in optimization.
>
> My problem is, for example, what if I want to deal with indoor
> temperature at 1200. Or if I want to use in the optimization the
> maximal/minimal values of some parameters. Is there any possibility
> to recalculate the output results and then to use in the
> optimization?
>
> I do not know if I explained this properly. I just want to use the
> particular values of some parameters in the optimization.
>
> Please, if you know how to deal with this and if the explanation is
> bigger send me that like some documentation file.
>
> Thank you in advance and regards
>
> Natasa M.Djuric
>
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the
appropriate folder in the Files area of the Support Web Site.
>
>
>
>
> _____
>
> Yahoo! Groups Links
>
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
>
> * To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?
subject=Unsubscribe>
>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the
appropriate folder in the Files area of the Support Web Site.
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/