Re: [EnergyPlus_Support] how to analysis with two earthtube pipes in energy plus

["Michael J. Witte" <mjwitte@xxxxxxxx>]

The EnergyPlus programming is very clear that only one EarthTube statement is  
allowed per zone.  

If the earthtube characteristics are the same, you can use a schedule to 
control when the earthtube is active.  See yesterday's reply to a similar 
question (yahoo message #9256).

Mike


On 31 Oct 2007 at 2:29, y wrote:

> hello, I want to ask how to set up two earthtube in different 
> temperature control at one zone? For example, one pipe will be used 
> between 0-15 degree and the other pipe will be used between 27-100 
> degree,in other words, it is unused between 15-27 degree. It has errors 
> if I set up more one pipe in one zone even if the temperature control 
> is different, but does it allow only two pipes in one zone? It works if 
> I just set up two pipes in one zone.thanks
> 
> 
> 
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
> 
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
> 
> Attachments are not allowed -- please post any files to the appropriate folder
> in the Files area of the Support Web Site.
> 
> EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the
> Documentation link and press the "search" button.
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 


========================================================
Michael J. Witte, GARD Analytics, Inc.
EnergyPlus Testing and Support      
EnergyPlus-Support@xxxxxxxx





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/