[EnergyPlus_Support] Re: Calling external files

["songarriga" <songarriga@xxxxxxxxx>]

Thanks Edwin and Peter,

I'll try to follow your suggestions, and I'll tell you if I find 
problems. The information was very useful for me.

Cheers

ÁLVARO

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Edwin Lee" 
<leeed2001@...> wrote:
>
> If the .dat file just contains a section of the input data (for 
instance for
> a parametric study), then the EP-Macro tool can be used to import 
data into
> the input file.
> 
> You can have a core input file with a command like ##include
> constructiondata.dat.  Then when EP-Macro comes along it will just 
put the
> contents of constructiondata.dat into the core input file.  Then 
you would
> only have to change the constructiondata file, and the core input 
file is
> 'unchanged'.
> 
> Also, E+ allows you to input schedules through external files.  
This helps
> to alleviate the problem of huge input files if you have hourly 
experimental
> data for instance.  This may be what the thesis you mentioned is 
doing.  If
> they have experimental data, this could be some measured surface
> temperatures for instance in the .dat file.
> 
> Those are the two ways of bringing input into E+ that I remember 
off the top
> of my head.
> 
> Edwin
> 
> On Tue, Apr 22, 2008 at 5:57 AM, songarriga <songarriga@...> wrote:
> 
> >   Hello EPlus forum,
> >
> > I`m new writing here but I use to read you, so first of all say 
hello
> > everybody.
> > My question is the following. I've been reading a master thesis 
about
> > the validation of a trombe wall in EnergyPlus, I don't know if you
> > know it. The fact is that for making this validation the author 
call
> > to external file (*.dat) which contains requested information for
> > running the simulation. My doubt is about how can be done this
> > calling or if by the way is it neccesary to make any change in the
> > source code. Please if it's possible I'd like to know more about 
this
> > possibilitie of requesting info from external files.
> >
> > Anticipated thanks
> >
> > Alvaro Campos
> >
> > Department of Thermal Enginnering
> > Escuela Técnica Superior de Ingeniería de Bilbao
> > Universidad del País Vasco (UPV-EHU)
> > 48013 Bilbao, Vizcaya
> > País Vasco - España
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/