[EnergyPlus_Support] peak design load calculate method comparison ?

["yhleifei" <yhleifei@xxxxxxxxxxxx>]

Dear E+ Group, I am working on a model to calculate peak design heating 
and cooling load with e+, and compareing the result with design 
calculate method. 
The design calculate method is Cooling Load Temperature 
Difference/Cooling Load Factor (CLTD/CLF) form requiring only 
handtractable arithmetic and be widely used by designer.
The peak design cooling load of e+ is twice of CLTD/CLF. 
Ask for some suggest or some information.
Thank you advance.
Lei Fei


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/