RE: [EnergyPlus_Support] Ventilated facade

Thank you for answering my question.. I have just found what I was doing wrong. Now I can see the small difference that Josep talk :).

But I have another question, because I need to simulate the building in r city that does?t have a weather file. I only have the weather file from another program (SOlterm).

I have already tried to convert the file with the program EnergyPlus Weather Formatted Data.

Anyone can help me with this?

thanks

catarina

----- Original Message ----
From: "josep.sole@uralita.com" <josep.sole@uralita.com>
To: EnergyPlus_Support@yahoogroups.com
Sent: Wednesday, September 17, 2008 5:54:41 PM
Subject: RE: [EnergyPlus_Support] Ventilated facade

I?ve modeled very simple cases with ventilated façades and is possible to see small (significative) differences on energy demand comparing to non ventilated façades.

Josep Solé
URSA Ibérica Aislantes SA - URALITA
Dirección Técnica
C/ caspe nº 17 6ªPlanta
08010 - Bareclona - España
Tel +34 344 11 00
Tel IP +34 93 344 11 36
Móvil +34 606 42 32 14
Fax +34 344 11 00

www.ursa.es

www.ursa-online. com

www.uralita. com

P URALITA / URSA se compromete con el ahorro de energía. Antes de imprimir este mensaje asegúrese de que es necesario.

Aviso de confidencialidad
Este mensaje contiene información que puede ser confidencial y de uso restringido. Si usted no es el receptor deseado del mensaje (ni está autorizado a recibirlo por éste) no está autorizado a copiar, reenviar, o por otra parte, divulgar el mensaje o su contenido a cualquier otro. Si ha recibido este mensaje por error, por favor, notifíquenoslo inmediatamente y bórrelo de su sistema.

De: EnergyPlus_Support@ yahoogroups. com [mailto: EnergyPlus_Support@ yahoogroups. com ] En nombre de Griffith, Brent
Enviado el: martes, 16 de septiembre de 2008 22:31
Para: EnergyPlus_Support@ yahoogroups. com
Asunto: RE: [EnergyPlus_ Support] Ventilated facade

Perhaps you are not seeing changes in interior temperatures because they are being controlled by a system (e.g. purchased air).

From: EnergyPlus_Support@ yahoogroups. com [mailto: EnergyPlus_Support@ yahoogroups. com ] On Behalf Of Catarina Carvalhal
Sent: Tuesday, September 16, 2008 2:03 PM
To: EnergyPlus_Support@ yahoogroups. com
Subject: [EnergyPlus_ Support] Ventilated facade

Hi,

I am having some problems in simulation ventilated facades. I am exporting a idf file from desingbuilder, them in energyplus I change the other condition model and exterior natural vented cavity.

The results are very strange, because i don't see any changes in the interior temperature when compared with the building without the ventilated facade.

To simulate that type of façade I only have to change the object, other condition model and exterior natural vented cavity, or I have to change other object too?

And another answer is I define the location of the building in IDF Editor, and then I input the weather file in EP-lunch, is there any problem in doing that?

Thanks,

Catarina Carvalhal