[EnergyPlus_Support] Re: about stand-alone energy recovery ventilator

["llyymmff" <liyuemingff@xxxxxxx>]

Thank you very much!
But I checked the controller object again,and I don't make the 
mistake. I really don't know what is my error.

Best Regards!
Lym
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Richard Raustad 
<RRaustad@...> wrote:
>
> Check the controller object, the name can not be blank. Also make 
sure 
> there is only 1 comma on the first line.
> 
>   CONTROLLER:STAND ALONE ERV, << only 1 comma here
>  >>  ERV OA Controller 1,     !- ERV controller name
> 
> 
> llyymmff wrote:
> >
> > Hello, all
> > I have a problem about simulation of stand-alone energy recovery
> > ventilator (ERV). I want to use ERV in the heat pump: air to air
> > system. I don't know if this is feasible. I add the ERV system 
into
> > heat pump system according to the example file:
> > HVACStandAloneERV_Economizer (this example is in a Window AC 
system).
> > I always get the error warning just like the following:
> > ** Severe ** CONTROLLER:STAND ALONE ERV Name, cannot be blank.
> > I checked the IDF again and again, and I can be sure that I did 
input
> > the CONTROLLER:STAND ALONE ERV Name. I cannot understand this, 
and
> > could you please help me?
> > Thank you very much!
> > Best Regards!
> >
> > ym
> >
> >  
> 
> -- 
> Richard A. Raustad
> Senior Research Engineer
> Florida Solar Energy Center
> University of Central Florida
> 1679 Clearlake Road
> Cocoa, FL  32922-5703
> Phone:   (321) 638-1454
> Fax:     (321) 638-1439 or 1010
> Visit our web site at: http://www.fsec.ucf.edu
> 
> UCF - From Promise to Prominence: Celebrating 40 Years
>



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/