[EnergyPlus_Support] geometric model interfaces: ArchiCAD?

["Ana Rui Oliveira" <anarui.oliveira@xxxxxxxxx>]

Hi all,

Could anyone provide some hints on interoperability between ArchiCAD 
models and Energyplus? Namely, regarding the possibility of extracting 
geometric models (and, eventually, construction details) from an 
ArchiCAD model to an idf file via ifc protocol?... procedures, 
techniques, issues?... any previous experience on this area?

Thanks anyway,
Ana Rui.


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/