Hi,
I am modelling a building in
The default option to size the heatpump is
based on zone cooling load and there is a supplemental electric heating coil
along with heatpump heating coil.
The rooms are way below set point if I
turn off the supplemental heating coil. Is there a way I can size the heatpump
based on zone heating load ?
Thanks in advance,
Sonal
Rashmi Sonal, LEED AP
Environmental Designer
Computational and Simulation Analysis (CoSA)
www.burohappold.com
Tel: (+1) 212 616 0285
This transmission is
confidential and intended solely for the person or organization to whom it is
correctly addressed. If you are not the intended recipient of this
transmission, you should not take any action in reliance on it. Further, this
transmission may contain confidential design and other information owned by
Buro Happold Consulting Engineers PC. You should not copy, distribute, use,
offer for sale or hire such information or in any way infringe the design and
intellectual property rights of Buro Happold Consulting Engineers PC. It is
intended that communication by email from Buro Happold Consulting Engineers PC
or its employees is limited to communications connected to the services
provided by Buro Happold Consulting Engineers PC. Buro Happold Consulting
Engineers PC accepts no liability for any communications not connected to the
services it provides. Computer viruses may be transmitted or downloaded onto
your computer system via email communication. It is the recipient's
responsibility to take any action necessary to prevent computer viruses being
transmitted in this way. Accordingly, Buro Happold Consulting Engineers PC
disclaims
This message has been scanned by MailController.
__._,_.___
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___