You can just attach it to your email message.
Or you can go into the files area on the website and put it under Problem Submittals folder
At 12:07 PM 1/24/2010, Sumwel Plus wrote:
Am trying to send my IDF across for assistance, but am at a loss at how posting is done this system. Is it just by simple attachment and how
From: YuanLu Li <yli006@hotmail. com>
To: Linda <energyplus_support@ yahoogroups. com>
Sent: Sat, January 23, 2010 12:41:27 PM
Subject: RE: [EnergyPlus_ Support] GENERATING OUTPUT:VARIABLES
Post your IDF, or show how you have entered the objects.. Then we may be able to assist better.
Dr. Li
To: EnergyPlus_Support@ yahoogroups. com
From: sumwelplus@yahoo. com
Date: Fri, 22 Jan 2010 22:19:18 -0800
Subject: Re: [EnergyPlus_ Support] GENERATING OUTPUT:VARIABLES
I thaught same but my ERR file indicates no warning nor severe errors. Have re-run with no results
From: "Hu,Jia" <hujia06@gmail. com>
To: EnergyPlus_Support@ yahoogroups. com
Sent: Fri, January 22, 2010 8:03:17 PM
Subject: Re: [EnergyPlus_ Support] GENERATING OUTPUT:VARIABLES
hi, check the ERR file, it is probable there are some fatal errors.
On Fri, Jan 22, 2010 at 3:01 PM, Sumwel Plus <sumwelplus@yahoo. com> wrote:
Attachment not found: d:\eudora\attach\KUMASI_CONTROL_2.idf