[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] GENERATING OUTPUT:VARIABLES



Output:Variable,*,Outdoor Relative Humidity ,Timestep,EXHAUST-SCH-1;

Schedule:Compact,
    EXHAUST-SCH-1,           !- Name
    Any Number,              !- Schedule Type Limits Name
    Through: 12/31,          !- Field 1
    For: AllDays,            !- Field 2
    Until: 24:00, 0.00;      !- Field 4
 
You have set the schedule value to zero, therefore there was no .csv file.
 
Change the Field 4 value to 
    Until: 24:00, 1.0; 
 
or remove the schedule from the output variable line and terminating timestep with a semicolone should restored the output.
 
Output:Variable,*,Outdoor Relative Humidity ,Timestep;
......
.....  for all the output:variable, ..
 Dr. Li  



 
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: sumwelplus@xxxxxxxxx
Date: Sun, 24 Jan 2010 22:23:31 -0800
Subject: Re: [EnergyPlus_Support] GENERATING OUTPUT:VARIABLES

 
Please find my IDF file attached to help me out. Thank you!

From: Linda Lawrie <linda@fortlawrie.com>
To: EnergyPlus_Support@yahoogroups.com
Sent: Sun, January 24, 2010 7:11:51 PM
Subject: Re: [EnergyPlus_Support] GENERATING OUTPUT:VARIABLES

 

You can just attach it to your email message.

Or you can go into the files area on the website and put it under Problem Submittals folder

At 12:07 PM 1/24/2010, Sumwel Plus wrote:


Am trying to send my IDF across for assistance, but am at a loss at how posting is done this system. Is it just by simple attachment and how


From: YuanLu Li <yli006@hotmail. com>
To: Linda <energyplus_support@ yahoogroups. com>
Sent: Sat, January 23, 2010 12:41:27 PM
Subject: RE: [EnergyPlus_ Support] GENERATING OUTPUT:VARIABLES

 

Post your IDF, or show  how you have entered the objects.. Then we may be able to assist better.

 Dr. Li  


To: EnergyPlus_Support@ yahoogroups. com
From: sumwelplus@yahoo. com
Date: Fri, 22 Jan 2010 22:19:18 -0800
Subject: Re: [EnergyPlus_ Support] GENERATING OUTPUT:VARIABLES

 
I thaught same but my ERR file indicates no warning nor severe errors. Have re-run with no results


From: "Hu,Jia" <hujia06@gmail. com>
To: EnergyPlus_Support@ yahoogroups. com
Sent: Fri, January 22, 2010 8:03:17 PM
Subject: Re: [EnergyPlus_ Support] GENERATING OUTPUT:VARIABLES

 

hi, check the ERR file, it is probable there are some fatal errors.

On Fri, Jan 22, 2010 at 3:01 PM, Sumwel Plus <sumwelplus@yahoo. com> wrote:
 

Assistance Please,
 
I have specified five variables under the Output:Varaible object, however upon simulation the generated spreadsheet is blank with no results for these variables.






Say Happy New Year with Messenger for Mobile. See more.







Spread the cheer with Messenger for mobile. Learn more.

__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___