[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: Can it possible to change the HVAC inlet air temperature?

Thanks for your answer,but I still have no ideas where to start
what is Energy Management System? and where I can find those actuators?
I try to find it in engineering reference and Input/Output reference again. but no results

On Tue, Jan 26, 2010 at 7:47 AM, Griffith, Brent <brent.griffith@xxxxxxxx> wrote:

This is possible using Energy Management System.  Although it is a bit of an advanced feature, there are actuators available that can override the conditions placed on any of the Outdoor Air Nodes used in HVAC.  


From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Phylroy
Sent: Thursday, January 14, 2010 6:16 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Re: Can it possible to change the HVAC inlet air temperature?



You can but it will change the heat transfer for all the surfaces as well, and infiltration.

I'm looking at the same problem using a hourly air data obtained from TRNSYS's earth tube model.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, zjy mars <zjymars@...> wrote:
> hello, I try to find the option to change the HVAC inlet air temperature.
> but I can't. If I really need to do this, does that mean I have to modify
> weather data?


The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe