[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: Natural ventilation - Underfloor heating



You're welcome.
As I'm new in E+, any information you find besides the official documentation would also be useful for me. If you find it, feel free to share.

Luis Saraiva

2010/5/14 crobu.enrico <crobue@xxxxxxxxxxxxx>
 

Hi Luis,
the link contains realy interesting documents. Especially i've actually red the following:

Lecture 13 Loops Nodes Connections
Lecture 14 Intro to HVAC
Lecture 15 Air Primary Loops and Controls

I'm also checking an example file in the official documentation (RadLoTempHydrHeatCool.idf) that is giving me some other feedback on Underfloor Heating systems.

Many thanks Luis!

Regards

Enrico


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, luis saraiva <luissaraiva3@...> wrote:
>
> Hi Enrico,
>
> Like you I'm also a beginner in E+ and, besides all the documentation that
> comes with E+ I also found some slides about E+ at the "Laboratory of Energy
> Efficiency in Buildings is linked to the Center for Research in Construction
> (Civil Engineering Department) of Universidade Federal de Santa Catarina"
> website available for free by this link:
>
> http://www.labeee.ufsc.br/pos-graduacao/ecv_4202/ecv4202_doc.html
>
> I think they can be useful for your questions, specialy on the Branches,
> splitters, mixers.
>
>
> Luis Saraiva
>
>
> 2010/5/12 crobu.enrico <crobue@...>

>
> >
> >
> > Hi there,
> > I am quite new to the E+ IDF Editor (I usually use desigBuilder to generate
> > my files) and I need your help.
> >
> > I have been asked to model a naturally ventilated building with underfloor
> > heating. In my case it is a simple room 6*6*3, one window for natural
> > ventilation and underfloor Heating system.
> >
> > When Design Builder compiles the IDF, it includes a bunch of information
> > that are not so clear to me.
> > CoolingTower:SingleSpeed,Chiller:Electric:EIR,BranchList,ConnectorList,Splitter,Mixer
> > .. and so on..
> >
> > I would like than to compare the settings in a simple IDF file, edited with
> > the IDF Editor, to my file generated with Design Builder.
> >
> > Is there an example file in the documentation that you would reccommend to
> > me?
> >
> > Many thanks!
> >
> > Enrico
> >
> >
> >
>




__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___