[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: ems actuator for ideal loads air system

Are you getting an error from bcvtb or from parts in EnergyPlus?

ZoneHVAC:IdealLoadsAirSystem is the name of the Ideal Loads System object, if that may be the problem.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Sotiris Papantoniou" <sotos.enveng@...> wrote:
> I am trying to set an actuator controlled by "bcvtb" but the whole system
> crash. I am aware that I should ask the "bcvtb" help, but I believe that it
> is the same problem as setting an ems-actuator. The settings I am using are:
> ExternalInterface:Actuator,
>     HVAC,                    !- Name
>     Zone1HVAC,               !- Actuated Component Unique Name
>     Ideal Loads Air System,  !- Actuated Component Type
>     Air Mass Flow Rate;      !- Actuated Component Control Type


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: