My point is, you can do it yourself unless there are more
checks interior to the code:
Energy+.idd (a flat ascii file)
Material:RoofVegetation
,,,
N6 ,\field Thickness
\note thickness of the soil layer of the
EcoRoof
\required-field
\units m
\type real
\note Soil depths of 0.15m (6in) and 0.30m
(12in) are common.
\default 0.15
\minimum> 0.05 \maximum 0.5 \ip-units in
N7 ,\field Conductivity of Dry Soil
\required-field
\units W/m-K
\type real
\note Thermal conductivity of dry
soil.
\note Typical ecoroof soils range from 0.3
to 0.5
\default 0.4
\minimum 0.2 \maximum 1.0
Change the lines that say maximum and see if it runs.
This is totally outside the code.
You can then parameterize what you are looking for.