Re: [EnergyPlus_Support] Can I modify zone temperature?

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

How have you described the partitions between the
zones?  Are they interzone partitions?

Do you have your zones with "ground" floors?  If so, the
ground temperatures may be too low and influencing the zone temperatures
unrealistically.

EMS is likely the way to start -- you need to report out the changed
temperature to make sure you are making the change.

At 01:42 AM 1/17/2011, Wonjun wrote:
>  
> Supposing there are two zones. One zone is conditioned and another isn't
> conditioned.
> I want to see how conditioned zone's load is changed by the adjacent zone
> temperature. 
> In this situation, what can I do for applying a regression coefficient on
> the zone temperature? 
> I tried to use EMS, but there is no change on conditioned zone's load.
>
> Anyone can give me a precious advice? 
> Thanks in advance!

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___