[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] using IRTMaterial





Ooops, good to know this before I do any damage. The description in the IO Reference does not say this.

On 05/27/2011 10:08 AM, Griffith, Brent wrote:
 

Applications for the IRT material are fairly limited and an exterior opening is not one of them.  It transmits no solar or visible light.  It is only intended for interior partitions (between two thermal zones).  It offers a simple approach for two zones to nominally integrate interior thermal radiation heat transfer from one zone to another. 

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Ery Djunaedy
Sent: Friday, May 27, 2011 9:49 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] using IRTMaterial

 

 

Can we control the convection then? The opening should not contributed anything to the convection heat transfer.
Furthermore, the "surface temperature" should be similar to the air temperature or the sky temperature, such that the contribution of this opening to the MRT is minimal.

Well, put it simply: I do not know the properties of the IRTMaterial, as the I/O reference does not describe it.

Thanks,

Ery


On 05/26/2011 04:57 PM, Linda Lawrie wrote:

 

Why don't you make it a Window with properties similar to the IRTMaterial?

At 04:51 PM 5/26/2011, Ery Djunaedy wrote:

Folks,

I need help on how to use IRTMaterial, the infrared material. I
basically have a naturally ventilated space with an opening - not a
window, just an opening where the airflows. The best to model this type
of surface is to define the infrared material, where (a) there is no
surface convection (at least can be minimised) and (b) the surface will
let the solar radiation into the zone.

 




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___