[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Can't find room dew-point in rdd

Hi All, When I run certain scenarios with my chilled ceiling, I get this niffty error, which gives the room dew-point when the ceiling is deactivated due to condensation. I looked for a variable like this in the rdd file, but don't find it. Can one output this zone dew-point?

   ** Warning ** Surface temperature below dew-point temperature--potential for condensation exists
   **   ~~~   ** Flow to the following radiant system will be shut-off to avoid condensation
   **   ~~~   ** Hydronic Radiant System Name = PIERW%E03:PIERW%E03 RF
   **   ~~~   ** Predicted radiant system surface temperature = 16.83
   **   ~~~   ** Zone dew-point temperature= 16.84





------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/