When I comment out SizingPeriod:DesignDay, Summer Design Day, my other SizingPeriod:DesignDay, Winter Design Day (the remaining one) gets simulated. I get results for the entire day after the simulation (which starts only after sizing and a proper building warmup). I assume this amounts to "design day calculation" specified in the SimulationControl object?
SimulationControl,
Yes, !- Do the zone sizing calculation
Yes, !- Do the system sizing calculation
Yes, !- Do the plant sizing calculation
Yes, !- Do the design day calculation
No; !- Do the weather file calculation
The question is how do I do both of these special designday simulations?
Obviously if the one follows the other, I will get 2 days worth of results...will a building warmup take place between them also?
Like I said I'm not using runperiod objects.
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/