[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Re: IDF Review for no Cooling





The sorted IDF is attacned, and with the .csv obtained using reduced load.
 
Only about 1% of the internal  load is retained in the IDF.
 
With the load, it was cooling in Winter.  The room was over 33°C in Winter at night.

 Dr. Li  

 

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: matthew.sverre.anderson@xxxxxxxxx
Date: Mon, 14 Nov 2011 22:10:52 +0000
Subject: [EnergyPlus_Support] Re: IDF Review for no Cooling

 
I removed all but two of the Design Day Conditions, and adjusted the set points but I am still incompetent and cannot figure out why it will not call for cooling.

Below is the updated IDF:

>
>




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\DualDuctConstDamperDs.csv
Attachment not found:
d:\eudora\attach\DualDuctConstDamperDs.idf