Re: [EnergyPlus_Support] nodelist errors

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

That kind of message usually means you've used a
"nodelist" name in the place where it can only be a single
node.

At 01:37 PM 8/18/2012, Edie Taylor wrote:

** Severe  ** Only 1st Node used from List=LIVING LAB ZONE INLET AIR NODE NAME for AirTerminal:SingleDuct:ConstantVolume:CooledBeam=LIVING LAB CHILLED BEAM

I am receiving this error for my simulation. The 2nd node that is apparently not being used is called VAV 3-19Box Outlet Node Name and the simulation was previously giving me an error that this node was not connected to any component but as far as I can see, it is connected to a heating coil. I cannot seem to find the problem here. Could someone help?


Thanks in advance,


Edie



Content-Type: application/octet-stream;
         name="UVAlivinglaboratory_8-18-12.idf"
Content-Disposition: attachment; filename="UVAlivinglaboratory_8-18-12.idf"
X-Attachment-Id: f_h613zdk80

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___